Communicate with Supplier? Supplier
Jen Li Ms. Jen Li
What can I do for you?
Chat Now Contact Supplier

OPT Cutting Tools Co., Ltd.

Products

Home > Products > Carbide Taps > Thread Milling Cutters > NPTF thread milling cutters high quality

NPTF thread milling cutters high quality
NPTF thread milling cutters high quality
NPTF thread milling cutters high quality
NPTF thread milling cutters high quality
NPTF thread milling cutters high quality

NPTF thread milling cutters high quality

Payment Type: L/C,T/T,D/P,Western Union
Incoterm: FOB,CFR,CIF,FCA
Min. Order: 10 Piece/Pieces
Delivery Time: 30 Days

Additional Info

    Packaging: CARTON

    Productivity: 10000month/pieces

    Brand: OPT

    Transportation: Ocean,Land,Air

    Place of Origin: China

    Supply Ability: 10000month / pieces

    HS Code: 108040399

    Port: Yantian,Shekou,Chiwan

Product Description

NPTF Thread Milling Cutters high quality

thread milling cutters compared to taps
1. Lower cost, although a single Thread Milling Cutter is more expensive than a tap, but the cost of a single thread is much lower than that of a tap.

2. The precision is higher, the thread Milling Cutter achieves the accuracy with the tool compensation, and the precision level required by the customer can be selected.

3. The finish is good, and the thread milling cutter has better tooth finish than the tap.

4. The durability of the thread milling cutter is ten or even ten times that of the tap, which reduces the waste of working time for the tool change.

5. Not afraid of breaking, the risk of scrapping the workpiece after the tap is broken, the thread milling cutter is easy to take even if it is broken.

6. The machining efficiency of the thread milling cutter is much higher than that of the tap;

7. The blind hole tap can not be tapped to the bottom, and the thread milling cutter can.

8. In addition to M and UN, a thread milling cutter can machine internal and external

threads with different directions of rotation, and the tap can't.

9. Threaded holes with the same pitch and different thread sizes, the tap needs to be replaced several times, and the thread milling cutter can be used universally.

10. Thread hole diameter The first pass rule is out of date, the thread milling cutter can be corrected by the tool compensation, the tap is not, and the workpiece is only scrapped.

11. The tap can not be achieved when machining large threaded holes, and the thread milling cutter can be realized instantaneously.

12. The thread milling cutter cuts into powdery short chips, and there is no possibility of wrapping the knife; the tap is cut into spiral iron filings, and it is easy to wrap the knife.

13. Thread milling cutters are not fully toothed, and the machine load and cutting force are smaller than the taps.

14. The clamping is simple, the tap requires a flexible tapping shank; the thread milling cutter can be equipped with a shank such as ER HSK hydraulic heat rising.

15. A sleek thread milling cutter can be replaced at the same time. American-made, English-made blades, etc., economical.

16. When machining high-hardness threads, the tap wear is serious and can't even be processed. The thread milling cutter can be easily realized.


Application:
Since the current thread milling cutter is made of cemented carbide or other special alloys, the processing line speed can reach 80-200m/min, and the processing speed of high-speed steel cone is only 10~30m/min, so the thread milling cutter is suitable for high speed. The surface finish of the machined and machined threads is also greatly improved. Threading of high-hardness materials and high-temperature alloy materials, such as titanium alloys and nickel-based alloys, has always been a difficult problem, mainly because high-speed steel wire cones have a shorter tool life when machining the above-mentioned material threads, and use hard alloy thread milling. Knives for hard material threading are an ideal solution. The machinable hardness is HRC 58-62. For threading of superalloy materials, thread milling cutters also exhibit excellent processing performance and an unexpectedly long life. For threaded holes of the same pitch and different diameters, it takes a lot of tools to complete the tapping, but if you use a thread milling cutter, you can use a tool. After the tap wear and the thread size of the thread are less than the tolerance, it can not be used continuously, and can only be scrapped; when the thread milling cutter is worn and the threaded hole size is smaller than the tolerance, the necessary tool radius compensation adjustment can be performed by the numerical control system to continue. Threads of acceptable size are machined. Similarly, in order to obtain high-precision threaded holes, it is much easier to use a thread milling cutter to adjust the tool radius than to produce high-precision taps.

For the thread that does not allow the transition buckle or the undercut structure, the traditional turning method or taps and die are difficult to machine, but it is very easy to realize by CNC milling. In addition, the durability of the thread milling cutter is ten or even ten times that of the tap, and in the process of numerically milling the thread, the adjustment of the thread diameter size is extremely convenient, which is difficult to achieve by using taps and die. Due to the many advantages of thread milling, the milling process has been widely used in large-scale thread production in developed countries.

thread milling cutters thread milling cutters

Size Pitch Dimension Min.machining hole Model No.
Standard tpi D D2 L1 L2 mm
1/16-X27 27 10 5.03 73 9.4 6.3 LZ 10063-WN27NPTF
1/8-X27 27 12 7.5 83 9.4 8.4 LZ 12075-WN27NPTF
1/4%18 18 16 9.4 92 14.1 11.1 LZ 16094-WN18NPTF
3/8"X18 18 16 12.7 92 14.1 14.7 LZ 16127 -WN18NPTF
1/2"X14,3/4-X14 14 20 15.5 104 25.4 17.9,23.4 LZ20155-WN14NPTF
mi 1.5 11.5 20 19.9 104 33.1 29.4 - 56.2 LZ20199-WN11.5NPT
21/2"X8 8 20 19.9 104 38.1 67 LZ 20199-WN8NPTF

PRODUCT DETAIL:

Thread Milling CutterThread Milling CutterThread Milling CutterThread Milling CutterThread Milling CutterThread Milling Cutter


ABOUT US :

We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts, PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,


We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer , Carbide Taps, Carbide End Mill , Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.



Looking for ideal Cnc Machine Thread Milling Cutter Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Indexable Thread Mill are quality guaranteed. We are China Origin Factory of Milling Cutter Cnc Maching. If you have any question, please feel free to contact us.

Product Categories : Carbide Taps > Thread Milling Cutters

Send Inquiry

Jen Li

Ms. Jen Li

Tel:86-755-27579101

Fax:86-755-27570606

Mobile Phone:+8613928413454Contact me with Whatsapp

Email:opt@tongweicn.com

Address:Room 609,Building 1,Dulex Hi-tech Park,Longhua District,Shenzhen,China, Shenzhen, Guangdong